INSTRUCTION SHEET - rev.07:
Suggestments for the users, to read carefully before using the helmet the first time.
This helmet is a safety product for bicycle, rollerskate and skateboard use only. No helmet can protect the wearer against all possible impacts: every helmet is designed and produced to absorb shock by his partial destruction .
If the helmet suffers such an impact, even if the damage may not be visible, we suggest to destroy and replace the helmet.
To be effective the helmet must fit and be worn well on the head of the owner. Fix the straps so that they don’t cover the ears; to obtain the good position it’s possible to run the strap through the back anchorage.
Move the buckle away from the jawbone, adjusting the under throat pad and making the straps pass through the loop of the buckle: the straps must be securely tightened and the buckle always fastened .
A correctly fitted helmet should be comfortable and shouldn’t move forward to obscure vision or rearward to expose the forehead.
Don’t modify in any way the helmet: neither from the technical nor from the esthetical point of view. Every modification may compromise the user’s safety.
Don’t apply decals on your helmet. The helmet may be damaged and rendered ineffective by some common substances such as cleaning agents, solvents, petroleum and petroleum products, glues, adhesives, paints.
A helmet has a limited lifespan in use and should be replaced when it shows obvious sign of wear.
To avoid the risk of being injured by strangulation, DON’T allow children to use the helmet on playground equipments.
Use only water and mild soap to clean your helmet.
The helmet may be seriously damaged if exposed to temperatures exceeding 50 °C.
For some models it’s available – as accessory – a removable peak: put it on the front of the helmet and fasten it with the pins provided for.
Size adjustment: this helmet is adjustable at will fallowing the dimension of your head, some models are available in different size of polystryrene.
If your model has a velcro or wheel regulation system, open completely the system to regulate size - at the first time - and fasten the velcro or the wheel following exactly the circumference of your head.
If you have a S2 size adjustment open it at most pushing on the coloured (red/grey) parts and making run the black little band through its supports. Fit the helmet and push again on the back parts making them move towards the centre of nape of the neck.
Warranty*: This helmet is guaranteed for a period of 24 months from the original date of purchase to be free from defects in materials or workmanship. This helmet that is returned and is found to be defective in materials or workmanship will be either repaired or replaced with the nearest helmet model in price, size and colour available.
The warranty does not cover normal wear. Helmets returned for inspection must be sent in proper individual protective package, postage prepaid, to the distributor in your country with a dated proof of purchase and a letter explaining the reasons for the returning of the helmet.
The manufacturer shall not be held liable for any in direct special or consequential damage.
The warranty does not apply to helmets which have not been used properly according to the INSTRUCTIONS SHEET.
The warranty does not cover damages caused by accidents, abuse, negligence, incorrect adjustments or for use other then intended by the manufacturer. Any modification made by the user will render the warranty null and void. The warranty does not cover damages due to heat.
* This service is not available in all the countries.